Description:

The Waterless No-Flush Urinal Trap Insert traps debris and sediment keeping waste lines clear.They fit into urinal drains to filter urine and direct it into the drainpipe. Make sure to add sealants to keep solids out of the drain and block odors from rising out of the waste pipe.

Maintenance Instructions

REMOVE OR EXCHANGE EcoTrap® ONLY WHEN NEEDED, i.e.
slow urine flow or pooling. 

1. Have the X-Traptor® tool, new EcoTrap ® a plastic bag and a deodorizer ready and on hand.
2. Insert X-Traptor® into trap slots and engage on knobs.
3. While slowly pulling up, wiggle tool side to side to loosen EcoTrap ®. DO NOT PULL STRAIGHT UP! Once the EcoTrap ® is removed, spray some deodorizer into the drain.
4. With EcoTrap ® still on X-Traptor®, pour liquid contents into the open drain hole of urinal.
5. Deposit used EcoTrap ® in plastic bag. Disengage and remove X-Traptor®.
6. Seal the plastic bag and discard in locally appropriate manner.
7. Loosen any sediment accumulation in drain hole with any long object.
8. Pour a full bucket, approx. 5 gallons, of preferably hot water into drain hole of urinal to flush sediments from waste line before inserting new EcoTrap ®.
9. Take new EcoTrap ® and fill with water under faucet in sink. Then set EcoTrap ® insert into trapway. Push EcoTrap ® down, below rim of trapway.
10. Add 3 oz. of BlueSeal®. Done!